PDA

View Full Version : Syringes...



BBG
04-30-2014, 01:35 PM
I have terumo syringes, 5cc. No matter what size pin I draw with, no matter what oil, these things always draw so slowly. Even with 23g. I couldn't even come close to pushing oil through with a 30g during a subq injection.

What are your recommendatons on brands? Maybe I just don't know what I'm doing... lol

nate3993
04-30-2014, 01:37 PM
Could heat it up a lil with a blow dryer. 27g slin pins were slow, but worked really well.

What oil u using???? U still gonna compete?

longBallLima
04-30-2014, 01:49 PM
23 is pretty small for drawing oil IMO. 18 is what I always use. even 21s were too slow

KAB111
04-30-2014, 01:51 PM
Draw w/18, pin w/22's. Everything else is too slow for my liking. BD only, havent tried anything else.

BBG
04-30-2014, 02:00 PM
That's crazy, I heard 21 and below could take chunks out of the rubber vial top.

longBallLima
04-30-2014, 02:01 PM
Im still alive :D

but srsly, had to use a 21 once and it was a pain in the ass. 18s and be happy

nate3993
04-30-2014, 02:11 PM
You're fukin crazy. I'd never use lower than 27. So what if it takes a couple minutes. Ur ass will thank you later.

longBallLima
04-30-2014, 02:12 PM
Lol you guys are crazy. Never heard of anyone using anything over 21 till now.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

longBallLima
04-30-2014, 02:13 PM
To draw obviously. In with a 23

Sent from my SAMSUNG-SGH-I317 using Tapatalk

nate3993
04-30-2014, 02:16 PM
Although apparently I pinned my right ventro glute a bit much cuz I if I push on one area it hurts and I have no bruise there whatsoever. So I couldn't imagine what a fukin 18 could do. That just seems cruel.

longBallLima
04-30-2014, 02:17 PM
Lol again, I don't inject with an 18. 23 to inject. We were talking about drawing

Sent from my SAMSUNG-SGH-I317 using Tapatalk

BBG
04-30-2014, 02:18 PM
Maybe I'm just a bitch but 23g into shoulder was a pain. I can feel it's going to be sore for awhile.

I want to be able to do the slin pin method but not sure how to do it, what brand syringe, etc.

longBallLima
04-30-2014, 02:20 PM
YouTube slin pin, it's pretty Easy

Sent from my SAMSUNG-SGH-I317 using Tapatalk

BBG
04-30-2014, 02:22 PM
YouTube slin pin, it's pretty Easy

Sent from my SAMSUNG-SGH-I317 using Tapatalk

I love you

longBallLima
04-30-2014, 02:24 PM
Can't say the words yet, I'll get there someday, I promise! :P

Sent from my SAMSUNG-SGH-I317 using Tapatalk

nate3993
04-30-2014, 02:32 PM
It's a simple method. Stick the needle in the top and keep pulling back til you have the amount you want. Will it take a few minutes? Sure. But is it dam near painless? Yes.

And still. Fuk 23's....it's all bout dem 27's

- - - Updated - - -

Big black white guy....u never anwsered my question. U still gonna compete?

ryhigh
04-30-2014, 02:37 PM
1148


naaaa its about dem 28's son

longBallLima
04-30-2014, 02:59 PM
It's a simple method. Stick the needle in the top and keep pulling back til you have the amount you want. Will it take a few minutes? Sure. But is it dam near painless? Yes.

And still. Fuk 23's....it's all bout dem 27's

- - - Updated - - -

Big black white guy....u never anwsered my question. U still gonna compete?

Nate, I think he means back loading an insulin syringe, ie a slin

Sent from my SAMSUNG-SGH-I317 using Tapatalk

BBG
04-30-2014, 03:19 PM
Big black white guy....u never anwsered my question. U still gonna compete?

Never not ever. But maybe.

necropuppy
04-30-2014, 03:45 PM
I draw with 21, pin with 25. Guess it depends on your oil. My source is super thin, although he does not use EO tastes like GSO.

Sent from my Nexus 10 using Tapatalk

KAB111
04-30-2014, 03:50 PM
First time I tired a 25, I could hardly get it to push through and I moved the fn needle everywhere and tore my ass up! After that i said f it, 22's arent bad at all to me and they are quick and easy to empty.

BBG
04-30-2014, 05:43 PM
First time I tired a 25, I could hardly get it to push through and I moved the fn needle everywhere and tore my ass up! After that i said f it, 22's arent bad at all to me and they are quick and easy to empty.

Okay well at least I'm not alone in this BS. I think with the thinner needles you pretty need a smaller, narrower syringe to be able to get the oil out.

necropuppy
04-30-2014, 05:45 PM
Okay well at least I'm not alone in this BS. I think with the thinner needles you pretty need a smaller, narrower syringe to be able to get the oil out.

I believe this is the case smaller barrels equals more efficient in moving fluids thru narrow spaces. Read something somewhere about that.

Sent from my SCH-I545 using Tapatalk

BBG
04-30-2014, 06:16 PM
I believe this is the case smaller barrels equals more efficient in moving fluids thru narrow spaces. Read something somewhere about that.

Sent from my SCH-I545 using Tapatalk

Yeah there's something to this, I can't recall what it is. Physics wise.

USN HM 350Z
05-01-2014, 05:58 AM
3cc BD syringes, I draw with 18g BD hypos and inject with 22g BD hypos.

I have been in the medical field for damn near 20 years and have yet to hear or see of anyone getting chucks from drawing with an 18g. I have injected well over 5,000 patients with testosterone and that is the only needle we use to draw it.

You can used a 25g BD hypo in delts if you cant handle the 22g, it will just take a little longer and a steady hand.

longBallLima
05-01-2014, 11:40 AM
I heard that commies like 25s. Are you gonna be a commie? You don't love America or something?

Sent from my SAMSUNG-SGH-I317 using Tapatalk

nate3993
05-01-2014, 02:58 PM
y'all be crazy!

ryhigh
05-01-2014, 09:00 PM
Nate likes big things to poke him, huh Nate :D

BBG
05-01-2014, 09:38 PM
Update: Success with slin pin backloading.

weekend
05-03-2014, 03:38 AM
Never draw with anything larger than 23. It does eat the stopper and your vial will no longer be sterile.

I won't inject with anything bigger than a 25. 27 on a 3 ml is alright. 28g slin is where it's at.

The larger the barrel, the harder it is to push

Bucks
05-03-2014, 08:25 AM
I've just been loading slins with Trest Ace while watching Tv. Helps to develop patience. We'll see how long this lasts in the coming weeks, will probably change to back loading as I add another compound .

I prefer the slins for ED research.

Eden
05-05-2014, 09:37 AM
Bd in all fields.

18g to draw, 25g to administer.

Use slins whenever I need smaller groups. I've found some makes have crappy seals of the plunger to the sides of the housing, or where the hypo attached isn't tight, I always tighten my hypos way down before doing anything.

tallstraw
02-06-2015, 11:45 PM
I always used 25+ but recently looked at 23g for pinning and after your first pin you don't notice a difference. But it's much faster, which is subjective, since the cottonseed oil I use is thick as fuck, but if your oil glides easy on a 25g there's no reason not to. My 25g were taking like 1.5min per ml, which was probably causing more damage by the needle tip moving around from pushing for 1.5mins..than a 23g for 30secs would do.

weekend
02-07-2015, 12:37 AM
Have you ever backloaded slins? It only takes about 15 seconds to inject a ml... Honestly easy to go faster than my muscle can handle. Plus they are so easy to preload and then heat before use!

tallstraw
02-07-2015, 01:05 PM
No, never heard of it..I always wondered what this shit was when I heard people say it. Let me look it up. Thanks for the tip, I was always just like god my gear sucks how do these people all use slin pins lol

Ager looking it up I did use a 1ml for a while but no slin tip. Didn't think oil would go through. But I'd need a longer tip for ass shots..what do you do to circumvent that short slin tip? For a while Id just use a 1ml syringe. It cut my injection time by about 50%...but I then had to pin 3-4x a week since the barrel held less content..idk which method I liekdd more..I like less frequent pinning usually.