PDA

View Full Version : Steroid Powder Questions



Grape Ape
01-03-2013, 12:23 PM
I can get some Anavar powder for a good price. However, I'm not sure what I would do with it from there.

Could I simply dissolve the powder in high proof alcohol(everclear) or an oil like grapeseed oil? Then just use an oral syringe and shoot it back?

Would it be possible to make a transdermal with proviron powder, or would that be a waste of money?

Scope75
01-03-2013, 01:24 PM
Why not just weigh it out and make caps.

Grape Ape
01-03-2013, 01:39 PM
Is it really that easy to cap powders?

I guess I could cop a mg scale.

Is there a need to use a filler?

I guess I'm just afraid of inaccurate dosing with such small amounts.

nate3993
01-03-2013, 01:41 PM
Is it really that easy to cap powders?

I guess I could cop a mg scale.

Is there a need to use a filler?
U aren't a supplement company, so I wouldn't see the need for it

Scope75
01-03-2013, 01:45 PM
Is it really that easy to cap powders?

I guess I could cop a mg scale.

Is there a need to use a filler?

I guess I'm just afraid of inaccurate dosing with such small amounts.
Seems easy enough.
You could also just weigh it out everyday when your on cycle and toss the powder right in your mouth.

Coolazice
01-03-2013, 01:52 PM
I would think it would be easier to dissolve it in some Everclear and take it that way.

Rodja
01-03-2013, 02:03 PM
Suspensions are the easiest way for orals. Add oil, powder, and shake each time before administering dosage.

Cobalt
01-03-2013, 02:29 PM
X2 on the shaking. You can dissolve it in an alcohol carrier, but it can get hard to fully dissolve it.

My oral var came in an alcohol carrier, and wasn't fully dissolved. I increased the carrier (alcohol), but it still didn't get everything. I just shake it really well and then very quickly pull what I want with an oral syringe.

Rodja
01-03-2013, 02:36 PM
Most of the orals are not going to dissolve completely without some PEG, which tastes AWFUL.

BoneDaddy
01-03-2013, 03:29 PM
PEG being polyethylene glycol?

Rodja
01-03-2013, 03:48 PM
PEG being polyethylene glycol?

Yes, but there isn't a universal one for them since the MWs vary.

BBG
01-06-2013, 12:06 AM
When you dissolve something in ethanol (everclear):

Get a skillet. Fill it with water. Put it on the stove.

Take your desired amount of steroid powder. Put it in a beaker.

Take your desired amount of ethanol. Put it in the same beaker.

Place beaker in the hot/boiling water. Stir until clear (most things will dissolve fully like this).

If they don't dissolve fully, like Rodja said, PEG is probably needed.

Some stuff will dissolve in water.

Rodja
01-06-2013, 12:50 AM
Even with PEG and ethanol, var still doesn't dissolve completely. I think winstrol is also the same.

BBG
01-06-2013, 01:42 AM
Even with PEG and ethanol, var still doesn't dissolve completely. I think winstrol is also the same.

Depends on the concentrate, right?

Grape Ape
01-06-2013, 08:57 AM
Doesn't alcohol evaporate at a pretty rapid rate? You would have to compensate for this;right?

Rodja
01-06-2013, 10:04 AM
Depends on the concentrate, right?

Even at modest concentrations (e.g. 20mg/mL for var). IMO, making a solution is a pain in the ass and not worth the extra hassle. Just add oil and powder and make a suspension.

Scope75
01-06-2013, 11:44 AM
This thread since the start has had me thinking.
How does one just run into a bunch of steroid powder?? Lol
And Anavar powder at that!!

Rodja
01-06-2013, 01:03 PM
The internet is a magical thing.

h2s
01-06-2013, 03:50 PM
The internet is a magical thing.

It is a bit crazy what you can find out there.

Scope75
01-06-2013, 04:10 PM
The internet is a magical thing.
Yes it is...


It is a bit crazy what you can find out there.
Even when your not looking for said crazy thing. Lol
Start a search for 1 thing and get side tracked on another for 2-3 hours.

Grape Ape
01-06-2013, 06:12 PM
Pretty much. Too much time on the internet will get you there.

showstoppa5717
01-16-2013, 10:46 AM
Use oraplus or orasweet or a mixture to do your suspension. They are a pharma grade susp vehicle

Amazon.com: Ora-Plus Oral Suspending Vehicle By Paddock - 16 Oz: Health Personal Care (http://www.amazon.com/Ora-Plus-Oral-Suspending-Vehicle-Paddock/dp/B000GGHSQM)

AestheticOne
01-16-2013, 10:48 AM
Use oraplus or orasweet or a mixture to do your suspension. They are a pharma grade susp vehicle

Amazon.com: Ora-Plus Oral Suspending Vehicle By Paddock - 16 Oz: Health Personal Care (http://www.amazon.com/Ora-Plus-Oral-Suspending-Vehicle-Paddock/dp/B000GGHSQM)

this is what i've been looking for! thanks for the post man.

dacookiemonsta
01-16-2013, 12:27 PM
this is what i've been looking for! thanks for the post man.

That's what we're all here for... People helping people...

Now where'd you get that var from? ;)

Scope75
01-16-2013, 02:03 PM
That's what we're all here for... People helping people...

Now where'd you get that var from? ;)

X2000!!!

longBallLima
01-16-2013, 02:16 PM
so... in avoiding discussing sources and such, can't google answer that one or am i being too naive?

showstoppa5717
01-16-2013, 04:19 PM
Yeah you can google it but you better know what to google. Btw op makes sure the var is white and grainy.

Eden
01-16-2013, 06:34 PM
When you dissolve something in ethanol (everclear):

Get a skillet. Fill it with water. Put it on the stove.

Take your desired amount of steroid powder. Put it in a beaker.

Take your desired amount of ethanol. Put it in the same beaker.

Place beaker in the hot/boiling water. Stir until clear (most things will dissolve fully like this).

If they don't dissolve fully, like Rodja said, PEG is probably needed.

Some stuff will dissolve in water.

We call that water whippin' where I'm from, and we don't make suspended anavar with it. haha.

BBG
01-16-2013, 06:42 PM
We call that water whippin' where I'm from, and we don't make suspended anavar with it. haha.

Not quite sure what this means haha

Eden
01-16-2013, 07:05 PM
You can use those same instructions to make Crack.

You usually don't stir the mixture, you hold the second glass and makes circular motions with it until every thing dissolves. Which is why it's called water whippin'

I didn't grow up in the greatest environment, lol

Scope75
01-16-2013, 07:19 PM
You can use those same instructions to make Crack.

You usually don't stir the mixture, you hold the second glass and makes circular motions with it until every thing dissolves. Which is why it's called water whippin'

I didn't grow up in the greatest environment, lol

Gotta love forums!!
Didn't think I'd learn this today.

tallstraw
01-16-2013, 11:37 PM
You can use those same instructions to make Crack.

You usually don't stir the mixture, you hold the second glass and makes circular motions with it until every thing dissolves. Which is why it's called water whippin'

I didn't grow up in the greatest environment, lol

B'more niqquh